Trailer Outlet Tilton NH

 

RC Motorcycle Trailers

trailer outlet nh
RST or RTT series cargo trailer with motorcycle package
trailer outlet
RFREL series Free Rider entry-level trailer
RFR 7w
RFR series Free Rider high-line trailer
trailer outlet, tilton nh
RFR series Free Rider high-line V-Nose trailer

RST or RTT series cargo trailer with motorcycle package
"Ask your dealer about adding a motorcycle package* to an RST or RTT round top cargo unit. Tie your bike down when needed and still use the trailer for traditional cargo."

*Motorcycle package consists of one or two removable wheel chocks and (8) D rings. See dealer for details.

Click below to view spec sheets in a printable format:


Specifications for Royal Spring Trailer Tandem Axle (RSTTA) series 7 wide round top cargo trailer w/ 3500# axles
Standard models have flat floor inside with no wheel boxes
Units with wheel boxes inside are available
Available in 10, 12, 14, 16, 18 and 20 foot lengths
Model code example: RST7x14TA2 (RST7x14TA2WB with wheel boxes inside)


Axles and tires
3500# Dexter EZ Lube spring brake axles (2)
ST205/75D15C (4) Bias tires

Frame
4 inch tube main frame on 10 foot and 12 foot models
6 inch tube main frame on 14, 16, 18 and 20 foot models
24 inch on center floor cross members
24 inch on center wall posts
24 inch on center roof bows
Painted and undercoated frame

Hitch and coupler
2 5/16” coupler
Safety chains
Breakaway kit safety system
7 way round plug for tow vehicle

Doors
Double rear doors
36” camlock door curbside

Exterior
.030 exterior sheet metal
ATP stone guard 24” tall
Fiberglass cap
Galvanized roof
1 pair seal beam recessed tail/brake lights
Approved DOT exterior lighting

Interior
¾” plywood flooring
¼” brown luan interior walls
2 – 12V dome lights w/ wall switch
Standard dimensions
Interior height 72”
Exterior height 97”
Exterior widest point 101” – (On wheel box inside models (WB) 92”)
Inside wall to wall width 80”
Rear door opening width 75”
Rear door opening height 66”

Note: Dimensions listed are for flat – floor, NO wheel boxes inside models unless otherwise noted.

Trailers for sale nh

RFREL series Free Rider entry-level trailer
"Our value leader flat top, low-profile motorclcye trailer."

Specifications for Royal Free Rider Motorcycle Trailer (RFREL) series 6 wide flat top low profile motorcycle trailer w/ 3000# idler axle
Available in 10, 12 and 14 foot lengths
Model code example: RFREL6x12SA


Axle and tires
3000# Dexter EZ Lube 22 ½ degree up torsion idler axle (1)
ST205/75D15C (2) bias tires

Frame
4 inch tube main frame
24 inch on center floor cross members
16 inch on center wall posts
24 inch on center roof bows
Painted and undercoated frame

Hitch and coupler
2”coupler
Safety chains
Breakaway kit safety system
4 way flat plug for tow vehicle

Doors
Spring assisted ramp door w/ ATP transition flap inside
32” camlock door curbside

Exterior
.030 exterior sheet metal
ATP stone guard 24” tall
Rear stabilizer jacks
2 - flo-through vents
Fiberglass cap
Galvanized roof
1 pair led strip tail/brake lights
Approved DOT exterior lighting

Interior
¾” plywood flooring
3/8” plywood interior walls
2 – 12V dome lights w/ wall switch
Standard dimensions
Interior height 65”
Exterior height 82”
Exterior widest point 90”
Inside wall to wall width 68”
Rear door opening width 63”
Rear door opening height 61”

All dimensions based on standard model in this series. Please discuss with dealer any critical dimensions before ordering. An optional brake axle is available in this series, and may be required in some states. Please consult your dealer.

Click Below to view a printable spec sheet:

RC Trailers, Tilton NH

RFR series Free Rider high-line trailer
"Flat top low-profile motorcycle trailer ready for your bikes. Many standard features inside and out, a flashy trailer that is worthy of transporting your motorcycles."


Specifications for Royal Free Rider (RFR) High–Line Motorcycle Trailer
6 wide flat top low profile motorcycle trailer w/ 3000# idler axle
Available in 10, 12 and 14 foot lengths - Model code example: RFR6x12SA


Axle and tires
3000# Dexter EZ Lube 22 ½ degree up torsion idler axle (1)
ST205/75R15C (2) Radial tires on silver mod wheels

Frame
3 inch tube main frame
24 inch on center floor cross members
16 inch on center wall posts
24 inch on center roof bows
Painted and undercoated frame

Hitch and coupler
2”coupler w/ Safety chains
Breakaway kit safety system and 4 way flat plug for tow vehicle

Doors
Spring assisted ramp door w/ 2 vice locks
Beavertail at ramp entrance, entry level 4 inches lower than main floor
ATP transition flap inside
ATP on ramp door and flap
32” solid RV door curbside

Exterior
.030 exterior sheet metal with smooth sides (no visible fasteners).
Cast corners front and rear
24” brite anodized lower trim kit
ATP stone guard 24” tall w/ ATP tongue cover
Rear stabilizer jacks
2 - flo-through vents
Fiberglass cap
1 piece aluminum roof
1 pair LED striptail/brake lights w/ approved DOT exterior lighting

Interior
¾” plywood flooring
Marble linoleum overlay on main floor
ATP runners on main floor, ATP in rear area on main floor
1 – Chrome tubular removable wheel chock w/ 4 D rings
3/8” white interior walls
White vinyl ceiling
2 – 12V dome lights w/ wall switch

Standard dimensions
Interior height 65” on main floor, 69” in rear area (behind beavertail)
Exterior height 82”
Exterior widest point 90”
Inside wall to wall width 68”
Rear door opening width 63”
Rear door opening height 65” (including beavertail)

All dimensions based on standard model in this series. Please discuss with dealer any critical dimensions before ordering. An optional brake axle is available in this series, and may be required in some states. Please consult your dealer.

Please Click on a link below to view a printable Spec Sheet:

The Trailer Outlet, Tilton NH

RFR series Free Rider high-line V-Nose trailer
"Top of the line bike trailer - V-nose standard, smooth exterior sides with a brite anodized trim package, white interior walls, and more..."


Specifications for Royal Free Rider (RFRV) High–Line Wedge Nose Motorcycle Trailer
7 wide flat top low profile motorcycle trailer w/ 3500# brake axles
Standard model available in 17, 19 and 21 foot lengths. Call size includes 5 foot wedge.
Standard model code example: RFRV7x21TA2


Axle and tires
3500# Dexter EZ Lube 22 ½ degree up torsion idler axles (2)
ST205/75R15C (4) Radial tires on silver mod wheels

Frame
4 inch tube main frame
24 inch on center floor cross members
16 inch on center wall posts
24 inch on center roof bows
Painted and undercoated frame

Hitch and coupler
2 5/16”coupler w/ Safety chains
Breakaway kit safety system and 7 way round plug for tow vehicle

Doors
Spring assisted ramp door w/ 2 vice locks
Beavertail at ramp entrance – entry level 4 inches lower than main floor
ATP transition flap inside
ATP on ramp door and flap
32” solid RV door curbside

Exterior
.030 exterior sheet metal w/ smooth sides (no visible fasteners)
Cast corners front and rear
24” brite anodized lower trim kit
ATP stone guard 24” tall w/ ATP tongue cover
Rear stabilizer jacks
2 - flo-through vents
Fiberglass cap
1 piece aluminum roof
1 pair LED strip tail/brake lights w/ approved DOT exterior lighting

Interior
¾” plywood flooring
Marble linoleum overlay on main floor
ATP runners on main floor, ATP in rear area on main floor
2 – Chrome tubular removable wheel chocks
3/8” white interior walls
White vinyl ceiling
8 D rings
2 – 12V dome lights w/ wall switch

Standard dimensions
Interior height 65” on main floor, 69” in rear area (behind beavertail)
Exterior height 82”
Exterior widest point 101”
Inside wall to wall width 80”
Rear door opening width 75”
Rear door opening height 65”

All dimensions based on standard model in this series. Please discuss with dealer any critical dimensions before ordering.

Click here to view a printable spec sheet

The Trailer Outlet © 2008 -